Home Page
ꄲ
Semiconductor
ꄲ
Wafer laminating machine
ꄲ
SINTAIKE STK-7121 Semi-automatic substrate cutting and laminating machine
SINTAIKE STK-7121 Semi-automatic substrate cutting and laminating machine
STK-7121 semi-automatic substrate cutting and laminating machine features:
- 8 "/12" bearing ring is applicable and can also support customization; Optimized design of square bearing ring
- Advanced anti-static roller film pasting technology
- Automatic film feeding and pasting
- Manual substrate loading and unloading
- Manual film cutting
- Blue film and UV glue film are supported.
- Program control based on PLC, with touch screen
- Configure the emergency stop button
- Tri-color lighthouse and buzzer, which are used to monitor the operation status.
Performance of STK-7121 semi-automatic substrate cutting and laminating machine;
| Wafer yield |
≥99.9% |
| Film pasting quality | No bubbles (excluding dust particle bubbles) |
| Hourly capacity | ≥ 80 Frame |
| Product replacement time |
≤ 15 minutes |
Specification parameters of STK-7121 semi-automatic substrate cutting and laminating machine;
| Substrate size |
200(L) x 50(W) ~ 250(L) x 70( W)mm |
| Substrate thickness |
0.1~1mm，warping (Warpage) < 8 mm |
| Substrate type | QFN, DFN, LGA, etc. |
| Membrane type |
Blue film or UV film Width: 230~400 mm Length: 100m Thickness: 0.05 ~ 0.2mm. |
| Frame bearing ring |
Customers can customize the standard of square bearing ring. 8 "and 12" Square Bearing Rings |
| Film sticking principle | Anti-static roller film pasting |
| Film pasting accuracy |
X-Y：+/- 0.5mm ；Θ：+/- 0.5 |
| Film pasting tray | Replaceable contact table with antistatic coating; Or a silica gel tabletop or a porous metal tabletop. |
| Loading and unloading mode | Manual placement and removal of base plate/bearing ring |
| static control | Anti-static coating wafer table/anti-static film roller/anti-static ion generator device |
| Cutting system | Manual track type direct cutting knife |
| Base plate/bracket positioning | Universal marking/spring locating pin |
| control unit | Based on PLC control with 5.7 "touch screen. |
| Safety protection | Configure the emergency stop button |
| Power supply voltage | Single-phase alternating current 220V,6A |
| compressed air | 5 kg of clean and dry compressed air with a flow rate of 2 cubic feet per minute. |
| machine casing | White plastic-sprayed metal shell |
| volume | 680mm (width) * 1110mm (depth) * 870mm (height) |
| net weight | 110 kg |
