Home Page
ꄲ
Semiconductor
ꄲ
Wafer laminating machine
ꄲ
SINTAIKE STK-7150 Floor-standing advanced semi-automatic wafer cutting and laminating machine Wafer Mounter
SINTAIKE STK-7150 Floor-standing advanced semi-automatic wafer cutting and laminating machine Wafer Mounter
Wafer laminating machine STK-7150 floor-mounted advanced semi-automatic cutting laminating machine features:
- Floor-standing, suitable for 8-12 inch silicon wafer, silicon carbide, gallium arsenide, sapphire, glass and other materials.
- Keywords automatic cutter, automatic film cutting, automatic waste film collection,
- Automatic film drawing, automatic film pasting, and empty ring pasting /Frame.
Wafer laminating machine STK-7150 floor-mounted advanced semi-automatic cutting laminating machine performance;
| Wafer yield |
≥99.9% |
| Tearing film quality | No bubbles (excluding dust particle bubbles) |
| Hourly capacity | ≥ 70 wafers |
|
MTBF |
> 168 hours |
|
MTTR |
< 1 hour |
| down time |
<3% |
| Product replacement time | ≤ 10 minutes |
Wafer laminating machine STK-7150 floor-mounted advanced semi-automatic cutting laminating machine specifications:
| Wafer diameter |
8”、12”wafer |
| Wafer thickness |
100 ~750micron |
| Wafer type | Silicon, gallium arsenide or other materials |
| Membrane type |
Blue film or UV film (adhesion ≤8N/20mm) Width: 300 ~ 400 mm Length: 100m Thickness: 0.05 ~ 0.2mm. |
| Wafer bearing ring |
8”、12”DISCO standard |
| Film sticking principle | Anti-static roller film, roller pressure adjustable. |
| Wafer platen |
General (integrated) Teflon anti-static coating contact table The platen can be heated: room temperature ~100℃ Manual lifting of table and tray |
| Loading and unloading mode | Manual placement and removal of wafer/carrier ring |
| Antistatic control | Anti-static Teflon coated wafer table/anti-static film roller/anti-static ion fan |
| Cutting system | Ring cutters are used for 8 "and 12" disco bearing rings. |
| Waste film treatment | Automatic collection |
| Film pasting accuracy |
X-Y:±0.5mm；θ:±0.5° |
| location mode | Wafer pneumatic pin positioning/load ring spring pin positioning |
| control unit | Based on PLC control, with 10.1 "touch screen. |
| Safety protection | Configure light curtain protection and emergency stop button. |
| Power supply voltage | Single-phase alternating current 220V,16A |
| compressed air | 5 kg of clean and dry compressed air with a flow rate of 100 l/min. |
| machine casing | White plastic-sprayed metal shell |
| volume | 850 mm (width) *1450 mm (depth) *1700 mm (excluding lamp height) |
| net weight | 485 kg |
