MALCOM MCD-1
summary
Brief introduction to the characteristics of MALCOM MCD-1 tin trace copper determination system;
- Simple determination can be made on site.
- The measuring range can be expanded according to the dilution of the sample.
- Desktop is small and light
- Results can be obtained in a short time (about 30 minutes)
- In order to enable anyone to use chemicals, complete components are required.
parameter
Specification parameters of MALCOM MCD-1 tin trace copper determination system;
| Determination matching element |
| A: Solder solution (nitric acid: sulfuric acid: pure water =1:1:8) |
| B: Diluent (pure water) |
| C: reaction reagent solution (TPPS・ acetic acid) |
| D: reaction accelerator (alcohol acid) |
| E: pH adjusting solution (nitric acid: sulfuric acid: pure water =1:1:8) |
| 小Container, polyethylene pipette, syringe, medical paper |
| outline dimension | W250×D300×H160 |
| principle | Because of the absorption light intensity method (spectral absorption measurement of TPPS imaging reagent) |
| measuring range | The content of copper in solder is 0.0~1.5wt%. |
| Determination accuracy | ±0.05wt% |
| Sample weight target | 1030mg |
| Absorber light source | LED |
| mixing time | 1~60 points |
| Use drugs | TPPS alcohol acid acetic acid nitric acid sulfuric acid |
| Libra | The possible range of determination is 0 ~ 99.9 mg, and the accuracy is ±0.2mg. |
| Power Supply | AC 100~240V |
| consumed power | Standby time: 20VA, action time: 50VA max. |
| weight | About 5kg |
