MALCOM FS-1
summary
Brief introduction to the characteristics of simulation device of MALCOM FS-1 wave soldering furnace;
Due to the small capacity of the solder bath, it is easy to exchange.
- Can simply exchange flux.
- Can observe the appearance of the welding part.
- Possibility of jet nozzle exchange
- In the nitrogen environment, it can be measured for welding experiments (option).
parameter
Specification parameters of MALCOM FS-1 wave soldering furnace simulator;
| Standard substrate size | 70mm×70mm (face of weld50mm×50mm) |
| Device size | W1100×D610×H700 (mm) |
| Track width | 70mm fixed |
| orbital velocity | 0.6~1.8m/min |
| Orbit angle | 0~7° |
| Effective size on the substrate | 30mm |
| Effective dimensions under the substrate | 5mm |
| warm up | Far infrared 700W |
| mode of heating | PID control setting |
| Welding aid measurement | Sprayer type (capacity about 1L) |
| Welding groove | Double wave type (capacity about 13kg) Heating capacity 640W. |
| Solder temperature heating mode | PID control setting |
| Overall dimensions of catheter | Outer diameter 70mm |
| Tin passing time | Arbitrarily variable |
| Body weight | About 90kg |
| Power Supply | AC100V (1.5kw) |
| Use gas |
Compressed air 0.2~0.4MPa Nitrogen for nitrogen atmosphere is 0 ~ 0.5 MPa (nitrogen atmosphere corresponding method) |
