Home Page
ꄲ
production equipment
ꄲ
maintenance/repair equipment
ꄲ
GOOT TP-100/TP-100AS Portable tin suction pump
GOOT TP-100/TP-100AS Portable tin suction pump
Brief introduction of characteristics of GOOT portable tin suction pump TP-100/TP100AS;
- Integrated design of temperature adjustment and tin absorption structure, portable tin absorption pump
- Built-in powerful small pump with vacuum degree of -0.08MPa(-600mmHg)
- The solder in the through hole can also be simply absorbed, and the temperature of 250~450℃ can be adjusted freely.
- Adopt exchange filter, which is easy to replace.
Specifications and parameters of GOOT portable tin suction pump TP-100/TP100AS:
| model | TP-100 | TP-100AS |
| rated voltage | 110V/220V AC，50/60Hz | |
| rated voltage | 80W，70W | |
| Temperature setting range | 250~450°C | |
| Heating core | The sensor has a ceramic heating core. | |
| Temperature control mode | Sensor feedback (ON-OFF control) | |
| Vacuum pump mode | Separated mode type | |
| Insulation resistance (500V DC) | More than 100MΩ | |
| vacuum degree | -0.08MPa (-600mmHg) representative value | |
| measure | 225×170 (mm) | |
| weight | 470g (excluding power cord) bushing | |
| Power line length | 1.5m (3-core wire, plug with ground wire) | |
| Standard fittings | Cleaning needle TP-100CP07/ filter TP-100F | |
Exchange accessories/optional accessories:
| Heating core for exchange | TP-100/200H |
| Heater sheath | TP-100/200F |
| Filters (3 sets) | TP-100/200K |
| Filter group | TP-100/200HP |
| 900-000 (needle) | 900-000 |
| bit | φ0.7mm、φ0.9mm |
| bit | φ1.4mm、φ2.4mm |
