GOOT RX-852AS high-power welding table

Brief introduction of characteristics of GOOT high-power welding table RX-852AS;

• Strong thermal resilience: due to the adoption of a small high-output heating core (150W) and a high-sensitivity sensor, the welding operation in a large area can be easily completed without feeling the temperature drop of the welding nozzle.
• Novel design of the handle (PAT.): It has the advantages of good hand feeling, soft wire of the electric soldering iron and short distance to the welding nozzle.
• Rapid heating: it can reach 350℃ in about 14 seconds (when using RX-80HRT nozzle, it can reach 350℃ in about 6 seconds).
• You can exchange welding tips (PAT.) without tools;

①The newly designed sliding mode is adopted, and tools such as heat-resistant mats and screwdrivers are not needed when the welding nozzles meet.

② You can also use the RX-80HRT welding nozzle of the company.

③ There are 25 kinds of exchange welding nozzles for RX-802AS, and 34 kinds of standard welding nozzles can be used.

④ Thick iron-plated welding nozzle corresponding to lead-free solder.

⑤ In order to prevent corrosion caused by lead-free solder, the whole model adopts a thick iron-plated nozzle.

• Lock function (PAT.): With the password, the machine can be locked without tools or cards.
• Hibernation function (PAT.): If the nozzle is not used for a certain period of time, it will automatically cool down (the time and temperature can be set freely) to reduce the nozzle oxidation caused by empty combustion of the nozzle; It can also be used together with the "automatic shutdown function"
• When the temperature of the welding nozzle (e.g. sponge in contact with water) changes, the hibernation function can be automatically released [when the temperature of the hibernation function (SST) drops below 100℃, this method cannot release the hibernation function]
• Prompt setting of welding time (to prevent overheating of components caused by too long welding time)
• When the welding nozzle touches the welding element and reaches the set time, it will send out a prompt sound, which can prevent the welding element from burning out for people who are not used to welding work and improve the stable welding quality.

(1) the temperATure of the welding nozzle is outside the DIF, and the welding time (at) begins.

(2) after the welding time is reached, there will be a prompt sound (at this time, it will flash twice)

(3) the staff will leave the welding nozzle electronic components.

• Welding tip temperature correction function (PAT.):

① The welding nozzle temperature can be corrected. When there is an error between the nozzle temperature and the indicated temperature, the temperature can be corrected by numerical value.

② setting of automatic shutdown function: it can automatically cut off the power supply when no operation is carried out within the preset time.

Specifications and parameters of GOOT high-power welding table RX-852AS: