EMIC F series vibration table

Brief introduction of characteristics of EMIC vibration test-bed;

• This vibration test platform can set experimental conditions such as acceleration, speed and vibration frequency, and simulate vibration environment and vibration load.

F series vibration test bench [standard specification]: the maximum vibration force is 1300 ~ 60000 N.

• General electric vibration test-bed commonly used in electronic equipment and automobile related accessories.
• F-series equipment is driven by the principle that current cuts magnetic lines to generate thrust, which is mainly composed of a "vibration generator" that generates vibration and a "power amplifier" that supplies power. Using D-class digital control system, the test requirements such as vibration force, speed, displacement and acceleration can be set freely, and the operation interface of the equipment is simple and fast. The application of high-power voltage amplifier makes the equipment efficient, low-heating, energy-saving and environment-friendly.

F series vibration test bench model

FH series vibration test bench [high speed specification]: the maximum speed is 2.0 ~ 2.3 m/s.

• Especially when the frequency is close to 20 ~ 80 Hz and more acceleration is needed, it is necessary to have a vibration test device that can produce higher speed. The FH series vibration test device is a high-speed vibration test device made for vibration test under the above conditions.

FH series vibration test-bed model

FL series vibration test bench [large displacement specification]: the maximum displacement is 100 MMP-P.

• The vibration test device, which enlarges the maximum displacement to 100mm p-p, is mainly used to deal with vibration conditions with large displacement and frequency below 10Hz.

Model of FL series vibration test bench

FV series vibration test bench [ultra-high-speed specification]: the impact pulse action time is 11 ms, and the acceleration is 980m /s-2(100G).

• The vibration test device used in the test under the test condition of "the impact pulse action time is 11ms and the acceleration is 980m/s 2 (100G)".

FV series vibration test-bed model

FT Series Vibration Test Bench [Transport Test Specification]: Vibration Test Bench for Packaging and Transportation

• A vibration test device specially designed for "safe transportation". It is possible to install a mechanism to strengthen the eccentric load moment and increase the maximum loading weight for loading stacked goods and large goods. At the same time, in order to use the fixing belt to fix the packaged goods simply, a fixture with honeycomb structure and a platform with hooks on the periphery are provided. Moreover, the horizontal vibrating table is of oil membrane structure, thus reducing the maintenance burden.

FT series vibration test-bed model

FC series vibration test bench [large water cooling specification]: large vibration force of 60 k～200 kN.

• The large-scale vibration test device is an ideal choice when it is required to carry out vibration test with large sample and large thrust. This exper imental device is cooled by water cooling. Compared with air cooling, the cooling efficiency is higher,  and the thrust obtained is higher than any series. It can deal with vibration tests of large electronic equipment, automobile parts, aviation parts,  avionics, satellites,  aerospace systems and defense systems. This series can meet the test requirements of various military standards and international standards including MIL, NDS, ASTM, IEC, ISO, BS and JIS.

FC series vibration test-bed model

FP series vibration test-bed [permanent magnet type specification]: Super energy-saving vibration test-bed without excitation coil

• Advanced energy-saving vibration generator without excitation coil and excitation power supply.
• As a vibration test device with a thrust of more than 10kN, a permanent magnet vibration generator is adopted for the first time in the industry.
• The excitation coil and excitation power supply are cancelled, and the "highest level of energy saving" is realized in the previous medium-sized vibration test device. At the same time, the cooling fan is reduced to 70% of the original, and the rotating speed can be adjusted according to the temperature of the vibration generator, so that the power can be greatly saved and the mute performance can be realized.

Model of FP series vibration test bench

FM series vibration test bench [electric triaxial specification]: Three-axis simultaneous vibration test bench with maximum vibration frequency of 2000 Hz.

• A 3-axis vibration system that combines years of technical crystallization from EMIC Co., Ltd. and international measuring instruments.
• The vibration test installation is suitable for the green energy-saving drive system "ECO-Vibe neo", which is beneficial to the environment. The thrust range used can be selected to reduce the required power.
• After the test tank for temperature and humidity test is combined, it can become a composite environment test device.

Model of FM series vibration test bench

FB Series Vibration Test Bench [Servo Triaxial Specification]: Multi-axis vibration test bench for transportation test and earthquake evaluation

• Vibration test device specially used for transportation vibration test.
• Reproduce the actual vibration through simultaneous vibration of 3 axes.
• Through 3-axis switching, 2-axis vibration in vertical and horizontal directions can be realized in sequence. There is no need to switch the vibration generator axially, and there is no need to reset the sample, so the overall test time can be shortened.

FB series vibration test-bed model