Home Page  ꄲ  Scientific device  ꄲ  Insulation deterioration test  ꄲ  ETAC SIR13/SIR13 mini/SIR13 SLIM Test system for insulation resistance deterioration of PCB board
1
넳 넲

ETAC SIR13/SIR13 mini/SIR13 SLIM Test system for insulation resistance deterioration of PCB board

ꄴPrevious： ETAC MLR22/MLR22 mini Test system for insulation resistance deterioration of PCB board
ꄲNext： null

Main features of SIR13/SIR13 mini:

  • Can carry out three kinds of tests: ion migration, insulation resistance and insulation characteristics.
  • All channels are equipped with micro-galvanometer, which can continuously test the resistance at high speed (40ms/8 channels).
  • SIR13/SIR13 mini can accurately capture the instantaneous ion migration phenomenon (from occurrence to end).
  • 250V test substrate: 8 channels /1 power supply with 128 channels max.
  • 500V test substrate: 1 channel /1 power supply max. 64 channels.
  • 1000V test substrate: 1 channel /1 power supply max. 64 channels.
  • 120V test substrate: each channel can be set with test conditions (measured values of loading voltage and current).
  • SIR13/SIR13 mini can set the loading voltage and measuring voltage at will, and there will be no missing measurement when switching.
  • SIR13 mini is a small model, which can be equipped with up to 3 SMU test substrates.

 

ETAC ATEC SIR13/SIR13 mini/SIR13 SLIM PCB insulation resistance deterioration test system specification parameters:

Loading voltage

100VPulse/250V/500V/1kV
High voltage unit

1.5kV/3kV/6kV/10kV
Measuring plate 8 pieces at most (Max128ch at 16ch/ plate)

Maximum current measurement range

Measuring range and resolution

1) 30mA(1μA resolution)

2) 3.2mA(10nA resolution)

3) 320μA(1nA resolution)

4) 3.2μA(10pA resolution)

5) 32nA(100fA resolution)

6) 320pA(1fA resolution)

 

Product Center

PRODUCT

넳 넲