MALCOM MS-9C
summary
Brief introduction to the characteristics of MALCOM MS-9C flux controller;
- Fully automatic management of the proportion of flux
- Manage all the built-in functions through computer.
- Numbers represent specific gravity values.
- The number indicates the temperature of the flux.
- Internal storage temperature compensation circuit (20℃ conversion)
- Internal storage moisture compensation circuit (0% conversion)
- RS232C output interface is provided.
- Automatic liquid level management
- Automatic notification of liquid cut-off
parameter
Specification parameters of MALCOM MS-9C flux controller:
| Specific gravity measurement range |
0.8000～0.9000(0.7500 ~ 0.8500 CTEC) |
| Specific gravity accuracy |
±0.003 |
| Specific gravity temperature compensation | Built-in temperature correction circuit (converted at 20℃) |
| Moisture compensation of specific gravity | Built-in moisture correction circuit (0% conversion) |
| Liquid level management range | About 5mm between the upper and lower limits. |
| Measuring range of liquid temperature |
0～50℃(PT temperature sensor) |
| Temperature accuracy |
±0.5℃ |
| Measurement range of moisture content in liquid |
0～9.9％ |
| Moisture content accuracy |
±1％ |
| Liquid supply method | Automatic pump supply mode (lift 1m・500ml/min) |
| Liquid cutoff | Automatically report to the buzzer with LED (red), and relay output (A connection). |
| Use slot | 18 L/L (for direct use) |
| External output |
Numbers: RS232C, B9600, C8, NP, S1 Analog: DC4-20mA |
| Sensor line |
3m |
| Output board |
6m |
| Liquid receiving part material | Vinyl chloride, stainless steel, PE, PP, EPT, polyurethane, fluorinated rubber, fluorocarbon, PA. |
| Use ambient temperature |
10℃～50℃ |
| Power Supply |
AC100V(or AC200V)，50/60Hz |
| consumed power | Rated 35VA |
| fuse |
2A |
| weight |
11kg |
