MALCOM RMS-165LS
summary
Brief introduction to the characteristics of MALCOM RMS-165LS on-line reflux furnace;
10 kinds of heating device settings. (Set by computer)
Maximum 10 temperature zones can be set to realize different temperature curves.
Adopt the heating control system independently developed by MALCOM, which can also give the most suitable temperature curve for the substrate with poor heat transfer effect.
Small production device with high efficiency and low energy consumption
On-line automatic substrate transfer
parameter
Specification parameters of MALCOM RMS-165LS on-line reflux furnace device;
| model | RMS-165LS-A |
| Corresponding substrate size |
Length and width: W165×L 200 (mm) Height: 20mm above the holding surface and 15 (mm) below. |
| Device size | W460×D730×H1067 (mm) |
| mode of heating |
Above: hot air and far infrared rays are used together. Below: far infrared rays |
| Cooling mode | Lower fan |
| Power Supply | 3-phase 200V, 50/60Hz, 7KVA |
| External air pressure | 0.3～0.5Mpa 100/min (MAX) |
| Substrate holding mode | Two-end connection support |
| Heater temperature | 330℃(According to the setting of our base plate) |
| Device setting input | Special software for computer (USB communication) |
| weight | About 100kg |
