MALCOM TMR-1

summary
Brief introduction of MALCOM TMR system software TMR-1;

• It can display the measurement data of temperature curve management and additional modules at the same time, and the temperature curve prediction function can shorten the operation time.
• Different from the current temperature curve management, the reflow furnace process is comprehensively managed and evaluated from all angles, and the ideal conditions can be made in a short time with the temperature curve prediction function.
• Click to expand. ※. (Temperature, oxygen concentration data)
• The measured data are analyzed and evaluated on the computer under the reflux project management series.

TMR system software TMR-1 [specialty]

TMR not only includes the original temperature curve management, but also can evaluate and manage the reflux project from various angles. In addition, equipped with a new temperature curve prediction machine, it is suitable for condition derivation in a short time.

• Low temperature, wind speed, oxygen concentration at the same time.
•  Shorten working time by using curve as support function.
•  You can read the temperature curve of TPD file (the old analysis program TAM series is in file form).

TMR system software receives information through computer.

• The data obtained from the reflow oven tester and reflow engineering management series receive information through the computer, and the environment in the furnace can be expressed on the computer screen.

TMR system software confirms the determination results.

• Observing the temperature curve, you can easily confirm the value of each data by moving the mouse.
• The video of the reflow camera can also be played at a specified point on the temperature curve.
• The measurement results of multiple models can be overlapped and stored uniformly. (Not for the same model)

Zoom function

• After specifying the range, you can expand a part of the observation chart.

TMR system software has analytical mode.

• General/List/Preparatory Heating/Heating/Region/Channel/Wind Speed/Oxygen Concentration

Indicates the judgment result.

• Select whether to indicate OK/NG on the chart.
• OK/NG discrimination, and the result of the set conditions is reflected in the measurement setting mode.

Decision condition item

• Conditions and scope of determination results (OK/NG).
• Preheat Time, Over time1～4, Temp Max, Slope Ave.1～3, Cooling Time, Slope Max, Delta T, Target Time

Print data result

• Not only can you freely choose various printing forms, but you can also CSV the data. (Print example in report form)

parameter

TMR system software [running environment]

Corresponding model (memory type) RCA-1RCO-1RCW-1RCM-62RCR-06RCM-GRCX-GL

Applicable OSWindows SP2 32bit

Windows Vista 32bit

windows 7　32bit

Necessary Memor32MB above 32 MB

OthersThe connection with the personal computer are used the USB cable or RS-232C cable.? (Depend on the method of connecting with Reflow Checker, Thermo-logger.) When you use the RS-232C cable, Please prepare the cross cable. 　　　　　　

Does not correspond to the simultaneous representation of RCR-06. ※

There are also the above-mentioned temperature analysis programs TAM series for reflow furnaces other than the corresponding models. ※. (The corresponding OS is different from the above)