MALCOM RCP-200
summary
Brief introduction of characteristics of MALCOM RCP-200 furnace temperature tester;
- RCP-200 adopts a dedicated micro thermocouple with high heat resistance, which can be miniaturized and used for 6CH determination.
- Portable design, easy to carry
- RCP-200 adopts gold-plated surface treatment to reduce thermal radiation and achieve high heat resistance.
- By using the attached special cooling device, the cooling can be carried out quickly and effectively.
- Because the data can be directly transmitted to the computer, there is no need for a data conversion device.
parameter
Specification of MALCOM RCP-200 furnace temperature tester;
| Measuring temperature range |
0～300℃ |
| Determination points | 1 ~ 6 o'clock |
| Maximum measuring time |
About 90 minutes of temperature sampling measurement is 0.5 seconds. (The measuring time is 15 minutes when the temperature measuring cycle is 0.05 seconds.) |
| Temperature sampling measurement | 0.05 seconds, 0.1 seconds, 0.2 seconds, 0.5 seconds, 1.0 seconds, 2.0 seconds, 4.0 seconds and 8.0 seconds can be set at will. |
| Temperature accuracy |
±2℃ |
| input | Thermocouple JIS-K, below 110Ω |
| Power Supply | Li-polymer battery |
| outline dimension |
W200×D50×H15 (mm) |
| weight | About 400g |
| Computer/printer output type |
USB |
| Temperature analysis program | TAM-4 corresponds to OS:Windows XP/2000. |
| Coordination software | TMR system program TMR-1 |
Remarks:
Temperature accuracy does not include thermocouple error.
The maximum measuring time can be without considering the heat resistance, and the measuring time in the reflow oven is not limited.
applied range
MALCOM RCP-200 furnace temperature tester uses:
- Used for SMT furnace temperature curve testing, such as wave soldering, reflow soldering and other high temperature environment furnace temperature testing.
