MALCOM DS-10
summary
Brief introduction of characteristics of MALCOM DS-10 wave soldering furnace temperature tester;
- Just put the tester on the track, you can measure the necessary information of wave soldering management, such as furnace temperature.
- DS-10 carries the function of measuring furnace temperature curve. Based on the original measurement management project, through preheating and tin-passing temperature sensors,
- The furnace temperature curve can be displayed with a sampling time of 50 ms.
- The high temperature resistant shell in the optional parts can cope with the special high temperature nitrogen furnace.
- A new tin-passing time sensor is selected to be more accurate.
parameter
Specification parameters of MALCOM DS-10 wave soldering furnace temperature tester;
| Cold contact compensation | Platinum temperature resistance compensation | |||
| Internal thermal performance |
150℃/5min |
|||
| Display part |
LCD |
|||
| External connection |
USB miniB |
|||
| Store data | one | |||
| sampling time |
50ms(fixed) |
|||
| Overall dimensions/weight | Width 78mm, length 214mm, height 43.6mm and weight 820g g. | |||
| Power Supply | 3 AAA7 dry batteries (Ni-MH rechargeable batteries can also be used) | |||
DS-10 measurement data specification:
| project | sensor | Representation method | measuring range | Precision content | Qualified or not. |
| preheat temperature | CA thermocouple | LCD3-bit digital display |
50～300℃ |
±1℃ |
PC software |
| Tin-over temperature | CA sheathed thermocouple | LCD3-bit digital display |
0~300℃ |
±1℃ |
PC software |
|
Tin passing time (once and twice) |
Electrode (4) | LCD3-bit digital display | 0 ~ 10.0 seconds |
±1℃ |
PC software |
| temperature curve | Preheating/over-tin temperature | sensor | 0~300℃ |
±1℃ |
PC software |
