MALCOM RCX-GL

summary

Main features of MALCOM RCX-GL furnace temperature tester series:

• RCX-GL can freely match the necessary test modules on the core memory (6CH temperature measurement).
• MALCOM has newly developed 12ch oxygen concentration RCX-O, in-furnace camera RCX-C, and wind speed measurement RCX-W modules for reflow furnace process management.
• The special analysis software TMR-1 can display oxygen, wind speed and camera animation on the same screen.
• The software TMR-1 has newly added the auxiliary setting function of furnace temperature curve, so that the ideal furnace temperature curve can be made simply.
• The battery can be a single 4-battery or a Ni-MH battery (option).
• Bluetooth transmission can transmit data wirelessly, or add WIFI module RCX-R.
• At the same time, it can save 20 groups of furnace temperature test data, which improves the efficiency of data acquisition.
• Thermocouple wire reminder function can avoid meaningless test when disconnection occurs.
• RCX-GL recently added a vibration measuring module RCX-SV.

Characteristics of core memory of RCX-S(SIX)6ch (channel) furnace temperature tester;

• The core temperature tester of RCX-GL series products has greatly improved the measurement function.
• A new system reference memory that greatly improves the performance of temperature measurement
• Equipped with thermocouple wire breaking function.
• Can save 20 test data, so it can correspond to multi-line continuous test (need cooling).
• Bluetooth transmission can read data without connecting a data line.
• Single 4 battery is used as power supply, and power display function is also equipped.

Specification parameters of RCX-S core memory 6ch:

12ch measuring module rcx-t (twelve)-Malcolm RCX-GL furnace temperature tester features:

• During the trial production of RCX-GL, the quality can be managed simply by changing from 6ch to 12ch.
• The 12ch temperature curve can be tested by adding it to the 6ch core memory.
• You can make new models or trial production at ordinary times, and replace the general 6ch temperature tester for evaluation.

12ch measurement module RCX-T specification parameters:

Commonly used modules

Malcom RCX-GL Furnace Temperature Tester Reflux Furnace Camera Module RCX-C;

• RCX-C High Temperature Resistant Camera Module for Shooting Actual State in Reflow Welding Furnace
• The camera is directly fixed on the base plate (thickness 19mm).
• Using reflective lenses, you can shoot from the side, top and inclined plane.

Specification parameters of camera module RCX-C:

MALCOM reflow soldering oxygen analyzer RCX-O(OXYGEN);

• Because it is heat-resistant, it can measure and remember the oxygen concentration curve when it flows in the actual overheated reflux furnace.
• Being able to grasp the oxygen concentration state of each reflux zone is helpful to give the best installation conditions and equipment state.
• The measuring range can be selected from two types (50 ~ 5,000 ppm or 1,000 ~ 1000～10000ppm).

RCX-O specification parameters of reflow soldering oxygen analyzer:

* Note 3 Ordinary alkaline power supply cannot be used. Please choose rechargeable Ni-MH battery for purchase.

The wind speed measuring module RCX-W(WIND) of Malcom RCX-GL furnace temperature tester;

• The wind speed measuring module RCX-W(WIND) needs a special heat-resistant shell when it is used.
• The wind speed curve on the substrate can be measured.
• The wind speed sensor is installed on the substrate, which can measure the wind speed curve of the place of interest.
• RCX-W can be in the same production state, and the wind speed can be measured when the reflux furnace is heated.
• According to the placement direction of the wind speed sensor, the up-and-down or left-and-right wind speed can be measured.

Specification parameters of wind speed measuring module RCX-W:

TMR-1 system software of Malcom RCX-GL furnace temperature tester;

• Different from the current temperature curve management, the reflow furnace process is comprehensively managed and evaluated from all angles.
• There is also a temperature curve prediction function that can make ideal conditions in a short time.
• The auxiliary furnace temperature curve setting function reduces the operation time.
• You can open the temperature curve of TPD file (the format of old analysis software TAM series).
• The temperature curve tester RCP-600/RCR-60/RCP-200 for reflow soldering is also compatible with this system.
• The above-mentioned temperature analysis program TAM series for reflow furnaces other than the corresponding models.

New module

MALCOM RCX-GL furnace temperature tester RCX-SV vibration sensor module;

• The vibration during the heating of the reflow oven is measured by two sensors RCX-SV.
• RCX-SV can measure the vibration of the track on the actual production line.
• Analyze the defects according to the vibration (when the reflow oven is heated)
• Confirm the track status and the connection between devices.
• The change of wind speed setting for vibration

MALCOM RCX-GL furnace temperature tester RCX-R wireless LAN module;

• Module for displaying temperature curve in real time
• RCX-R is safer and more secure when using WIFI.
• You can change the setting of reflux furnace while confirming the furnace temperature curve.
• RCX-R is equipped with memory function and data will not be lost.