TDM COMPACT
summary
TDM-Compact heating warpage tester /warpage analysis;
The TDM–Compact is a versatile instrument for a wide array of applications in the areas of process development, failure analysis, reliability, and quality control.
ABSOLUTE 3D CARTOGRAPHY
TDM is a patented tool for warpage analysis under a temperature profile. TDM uses the fringe projection technology (also called projection moiré) for non-contact, full-field acquisition of 3D topographies with a resolution as low as 0.5 μm. TDM-Compact acquires a full, absolute 3D cartography of devices with dimensions up to 310 mm x 230 mm (field of view up to 150 mm x 150 mm). Simultaneously, its powerful heating and cooling capabilities allow for virtually any temperature profile on the sample under test. The integrated software package provides tools for representation of the results as 3D plots, vectors diagrams, isometrics views and 2D profiles following user-defined profile lines (e.g., diagonal plots).
parameter
| model |
TDM COMPACT |
|
Imaging : |
Direct sample illumination, non-contact measurement |
|
Capabilities : |
Topography analysis: z(x,y) function of the temperature |
|
Maximum samples size : |
310 mm x 230 mm |
|
Oven size : |
150 mm x 150 mm |
|
Field of view (x,y) : |
Continuous Zoom from 30 x 30 to 150 x 150 mm |
|
Depth of view (z) : |
Up to 25 mm |
|
CCD camera resolution : |
5 megapixel |
|
Accuracy : |
+/-1 micron or 2% of measured value, whichever is greater |
|
(x,y) resolution : |
15 μm to 75 μm depending on the FOV |
|
Temperature range : |
Room temperature to 300° C continuous |
|
Heating method : |
IR lamps - top and bottom |
|
Heating rate : |
Up to +3° C/s (sample dependent) |
|
Cooling method : |
Regulated flow of pulsed air |
|
Cooling rate : |
Up to -2° C/s above 120° C |
|
Footprint : |
140 cm x 120 cm x 245 cm |
|
Weight approx : |
330 kg |
|
Utilities : |
Electricity : 230 VAC, 50 Hz, single phase . |
