SANYOSEIKO SK-5000
summary
Brief introduction to the characteristics and advantages of SANYOSEIKO Shanyang Seiko SK-5000 high-temperature observation device: (in stock)
- Dual-screen+temperature curve: SK-5000 can display the upper part and the inclined part on the same monitor, and the temperature curve can also be displayed while observing the image.
- Simple picture adjustment: You can enlarge or reduce the picture only by operating a control handle.
- Image observation function, which can check the temperature, time and observation ratio, and also control the interface to pause (and change the display color).
- The function of switching to a still picture makes image analysis more convenient.
- It is quite convenient to edit only the necessary parts into new image data.
- Click on the replay screen to switch from the still screen conveniently.
- The length, angle and area of the still picture can be measured, and the change of the sample can be quantitatively analyzed according to the temperature.
parameter
SANYOSEIKO Shanyang Seiko SK-5000 High Temperature Observation Device Specifications
|
SK-5000 |
Body part: 1350MM wide, 650MM deep and 810MM high. |
| Image processing part | |
| Video recording mode | MPEG-2 (input signal standard NTSC) |
| monitor | 17-inch TFT panel LCD monitor |
| Hyperinterface pauses displaying items. | Temperature time [display: hour (h), minute (m), second (s), 0.1 second (s)] Observe the proportional instruction. |
| Image processing project | Brightness contrast gray binarization |
| Determination item | Length, angle and area (circle, ellipse, quadrangular polygon) |
| control section | |
| Control mode | PID program * Tri-terminal bidirectional thyristor switch module control |
| Program setting | Temperature/time (which can be switched between hours-minutes and minutes-seconds) (up to 127 stages can be set) |
| input | JIS thermocouple |
| security apparatus/device/equipment | Device for detect excessive temperature rise of cavity and excessive temperature rise in stages |
| Gas flow replacement assembly | |
| Flow setting range | MAX liter/min and MAX100 liter/min. |
| Type of gas used | Air or nitrogen (please consult the manufacturer if you want to use other gases) |
